FL系列
首页>产品中心>空压机事业部>FL系列
FL11 - FL15FC

FL11 - FL15FC

产品分类:FL系列


功能概述:



气量:0.35-2.76m³/min


压力:6-12.5 Bar


尺寸:1035*640*1200 mm


噪音:61 d(BA)


重量:317-355 KG



产品详情

1、西门子智能控制器能够监控并调整系统参数,有运行事件发生时它能向您发邮件,无论您身处何地都能利用web浏览器访问压缩机系统,从而釆取对应的措施。

Siemens intelligent controller can monitor and adjust system parameters. When sort of running incident happens, it can send an email to you. No matter where you are, the compressor system will be accessed by web briwser and proper action could be taken accordiingly.

 

2、全套原装的唐纳森过滤系统,所有的设计都为更低的阻力及更好的过滤效果

A full set of original Donaldson filtration system, all designed for lower resistance and better filtration effect

 

3、增加15%的冷却器污垢系数,即使在污浊物较多的环境也能最大限度的保证合适的排气温度

Increase the fouling coefficient of the cooler by 15%, which can ensure the appropriate exhaust temperature to the greatest extent even in the environment with more dirt

 

4、改善的软连接,在压缩机运转过程中,有效的消除振动带来的漏油及空气泄露

The improved soft connection can effectively eliminate oil leakage and air leakage caused by vibration during the operation of the compressor

 

5、高达450pa的离心式风机,负压吸风,保证了机组的散热及优秀的噪音等级

The centrifugal fan up to 450 PA has negative pressure suction, which ensures the heat dissipation and excellent noise level of the unit

 

6、稳定的压缩主机,适合全负载及变负荷运转,持续稳定的气源输出

Stable compressor host, suitable for full load and variable load operation, continuous and stable air source output

 

7、独特的油气分离设计,分离速度将至2m/s以下,实现极佳的分离效果,延长后处理设备使用寿命及减少耗材消耗

Unique oil-gas separation design, the separation speed will be less than 2m / s to achieve excellent separation effect, prolong the service life of post-treatment equipment and reduce consumables consumption

 

8、优选的西门子零服务系数电机,避免了压缩机超负荷运行,极大的降低了昂贵的能源成本

The preferred Siemens zero service factor motor avoids the overload operation of the compressor and greatly reduces the expensive energy cost

 

9、使用与空气亲和力更强的冷却油,每单位冷却油可以包容更多的压缩空气,提高压缩效率

Using cooling oil with stronger affinity with air, each unit of cooling oil can contain more compressed air and improve compression efficiency

 

10、智能适应控制可以根据不同温度、负荷等条件智能调整压缩机适应性运行。

Intelligent adaptive control can intelligently adjust the adaptive operation of the compressor according to different temperature, load and other conditions.


11-15.png

客户留言

  • 看不清楚?点击换张图片

推荐产品